Build a car for you, not for them ! (the oil companies!)
|
ELECTRIC VEHICLE KITS
we now have complete kits available for the Mazda Miata, designed
for the first generation (89-97)
The adaptor plates, coupling,spacer and mount will also fit the
second generation, (98-04)


Air cooled volkswagen kit
Parts list:
Motor Impulse 9 1725.00
controller Curtis 1231C-8601 1690.00
precharge resistor 25w,750ohm 11.00
adapter motor to trans adapter/coupling 950.00
contactor Kilovac with aux contacts, coil economizer 239.00
fuse and holder Ferraz AQ30S(300volt) 500a with bluesea holder 100.00
throttle linear throttle 219.00
cable 1/0 welding cable sold per ft estimate 50ft ** 203.00
HD crimp cable ends #for 120v system (12v batteries) quantity 30 98.40
charger quickcharge onboard dual voltage input 880.00
charging port basic unit 26.00
gauges Hoyt dual meter (500a 100-150v) 245.00
meter shunt 45.00
total 6431.40
Kit price (total -3%) 6238.45
substitutions: 1--warp9 motor add 70.00
2--soliton controller add 926.00
(eliminates need for contactor(built in),precharge
resistor,and uses soliton throttle)
3--add DC-DC converter (with lead acid can add 349.00
usually just use one extra battery for accesories,
so DC-dc not needed)
Many other additions and substitutions available
Of course parts can be substituted or removed from list as desired..............


New Beetle Assembled Drive Train
We designed this unit for a 2002 VW New Beetle 1.8 GLX Turbo, with
automatic and A/C. many models share the same layout.
>Warp9 Motor
>Soliton1 Controller
>Motor Adapter
>Ancilliary Equipment Adapter (require slight trim of OEM Bracket, and reuse of the CrankShaft
Pulley)
Motor Mount assembly
Soliton1 Mounts
Proximity Switch Mount (Soliton1 Tach Input)
Crank Position Sensor Mount (reuses the OEM Crank Position Sensor)
Cam Position Sensor Mount (requires reusing your OEM Cam Position Sensor housing and wheel)
<< We are in the process of evaluating the usefulness of this sensor...this may be deleted for
production>>
2:1 Pulley Assembly for Cam Position Sensor & Prox Sensor (includes v belt)
Crank Pulley Adapter and Spacers
Double sided serpentine belt
Bearings
Proximity sensor
+ Shipping
This is the list/price of units that could be reused from your engine, but may be provided by us, if
you didn't want to bother with digging them out (we would not recommend digging out the Crank
Position Wheel).
Crank Pulley - Damper > 205.00
Crank Position Sensor > 134.00
Crank Sensor Wheel > 45.50
Cam Position Sensor > 137.00
Cam Impulse Wheel > 13.50
The unit will be preassembled, with the motor and tach input wiring installed to the controller,
ready to be dropped in.
Volvo v70 Assembled Drive Train
Designed for a 2001 Volvo v70, with automatic and A/C.
Kit includes
>Warp9 Motor
>Soliton1 Controller
> Motor Adapter
>Ancilliary Equipment Adapter
Motor Mount assembly
Soliton1 Mounts
Proximity Switch Mount (Soliton1 Tach Input)
Crank Position Sensor Mount (reuses the OEM Crank Position Sensor)
Proximity sensor
The unit will be preassembled, with the motor and tach input wiring installed
to the controller, ready to be dropped in.
GM PowerGlide Adapter
Should fit most rear wheel drive transmissions-turbo
200,350,400, manual 3 speed, 4 speed manual
Will fit most 9" to 11" motors.
6061-t6 Billet construction. Includes twin radial
bearings motor coupling system.
Unparalleled quality and design
No longer available
Toyota MR2 Adapter with half shaft mounting system
9" Motor Max.
Designed around a 2002 MR2.
6061-t6 Billet construction. Includes radial and thrust
bearing motor coupling system.
Precisely positions the half-shaft for a drop-in fit. Bearing
mount is nickle plated mild steel.
Unparalleled quality and design.
No longer available
motor not included with adapter
Lotus Esprit Motor Adapter
Designed around a early 1980's Lotus Esprit with a
Renault box.
6061-t6 Billet construction. Includes radial and thrust
bearing motor coupling system.
Unparalleled quality and design
No longer available
A NOTE ON OUR KITS:
Our "kit" designs are custom tailored to your vehicle and performance expectations. While
there are so called "universal" kits on the market, we have found over the years that most
people are not really happy with them for one reason or another, because every car and driver
is different with different expectations.
What we do is work with the customer in regards to their vehicle and performance
expectations and design a kit to fill these needs- while this is not truly an "off the shelf" kit, it
will leave a satisfied customer! We use quality parts designed to work together and will
package them at a discounted "kit" price. After all, most kit buyers purchase a kit for a lower
price than the separate components.
While this may take a few e-mails or phone calls before the purchase, we feel it is a much
better alternative than the e-mails and phone calls after the purchase of the other guys so
called "universal" kit-which we have found does not usually meet expectations in performance
or reliability. In the end, our goal is to have satisfied customers!
An example of our VW bug kit is shown below- there are many additions and substitutions
available in any kit......e-mail to discuss your options!
Air Cooled VW adapter (show at right)
No longer available
EV-PROPULSIONllc
conversions since 1975
QUALITY ELECTRIC VEHICLE CONVERSIONS AND QUALITY
PARTS
NEW ITEMS
KITS
1990 -2004 Mazda Miata kit
No longer available
No longer available
No longer available